CLBCY - F-100 INK
- MSDS: CLBCY
- Manufacturer: ORGANIC PRODUCTS CO
- Product Name: F-100 INK
- National Stock Number: 7510-00-438-6804
Product Identification
Product ID:F-100 INK
MSDS Date:02/26/1993
FSC:7510
NIIN:00-438-6804
Status Code:A
MSDS Number: CLBCY
Responsible Party
IRVING, TX 75060-4555
US
Emergency Phone: 0000000000
Info Phone: 214-438-7321
Cage: 01195
Contractor
Telephone: 214-438-7321
Cage: 01195
Ingredients
ETHANOL
CAS: 64-17-5
RTECS: KQ6300000
OSHA PEL 1000 PPM
ACGIH TLV: 1000 PPM
KETONE
CAS: 947-19-3
OSHA PEL 50 PPM
ACGIH TLV: 50 PPM
Hazards
Health Hazards Acute and Chronic:MINORIRRITATION FROM BREATHING.
MODERATE IRRITATION TO SKIN AND EYES. IF SWALLOWED CAUSES NAUSEA,
VOMITING.
Medical Cond Aggravated by Exposure:
First Aid
First Aid:REMOVE TO FRESH AIR. WASH AFFECTED AREAS WITH WATER. IF
SWALLOWED, INDUCE VOMITING. CALL FOR PHYSICIAN.
Fire Fighting
Flash Point Method:TOC
Flash Point:<30.C, 86.F
Lower Limits:2
Upper Limits:7
Extinguishing Media:CARBON DIOXIDE OR DRY CHEMICAL FOR SMALL FIRES,
ALCOHOL FOAM FOR LARGE.
Fire Fighting Procedures:USE SCBA WITH FULL FACE PIECE.
Unusual Fire/Explosion Hazard:KEEP AWAY FROM PILOT LIGHT, LIGHTS,
FLAMES, SPARKS, HEATERS, SMOKERS.
Accidental Release
Spill Release Procedures:ELLIMINATE ALL SOURCES OF IGNITION. WEAR
SUITABLE PROTECTIVE EQUIPMENT. COLLECT IN FLAMMABLE WASTE CONTAINER
FOR DISPOSAL.
Handling
Handling and Storage Precautions:MANUFACTURED FOR INDUSTRIAL USE ONLY.
WEAR RESISTANT GLOVES SUCH NEOPRENE, EYE PROTECTION, CHEMICAL
SPLASH GOGGLES, PROTECTIVE EQUIPMENT TO PREVENT PROLONGED SKIN
CONTACT.
Exposure Controls
Respiratory Protection:AIR SUPPLIED MASK IN CONFINED AREAS.
Ventilation:LOCAL OR MECHANICAL.
Protective Gloves:NATURAL RUBBER OR NEOPRENE
Eye Protection:MONO GOGGLES.
Other Protective Equipment:SAFTEY SHOWER AND EYE BATH.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:=77.8C, 172.F
B.P. Text:172 F
Vapor Pres:42 MMHG
Vapor Density:2+4
Spec Gravity:0.806@ 25/20C
Evaporation Rate & Reference:BUTYL ACETATE <3.14
Appearance and Odor:LIQUID MILD NONRESIDUAL ODOR
Percent Volatiles by Volume:50
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:AVOID HEAT SPARKS FIRES
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY PRODUCE
CARBON MONOXIDE AND OR CARBON DIOXIDE.
Disposal
Waste Disposal Methods:DESTROY BY LIQUID INCINERATION OR COLLECT BY
ABSORBENT MATERIAL. SEPOSIT IN POSTED TOXIC SUBSTANCE LANDFILLJ IN
ACCORDANCE WITH LOCAL, STATE AND FEDERAL REGULATIONS.
Other Information
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.